NISMO Performance Parts and Accessories for the Nissan Z

Nissan Z Heat Exchanger

Constructed from high-grade aluminum, with a tube-and-fin core and billet aluminum end tanks. The increased volume of the NISMO Heat Exchanger helps reduce charge air temperatures to maintain engine performance on hot days and track events.

NISMO Open Lug Set - Black

NISMO open ended lug nut set are a great addition to some aftermarket wheels. The open end design allows for full thread engagement when using longer wheel studs. Featuring forged 50BV30 chromium-vanadium steel construction, this 20 piece kit includes a 19mm hex socket adapter and is a perfect match for any 5 lug application.

Nissan Z Carbon Fiber Engine Cover

Dress-up the Nissan Z engine bay with the NISMO Carbon Fiber Engine Cover for a clean factory look under the hood. Utilizing OE attachment points, no modifications are required for easy installation.

Nissan Z Coilover Suspension

Featuring a linear race spring system, rebound damping adjustability, and aluminum unibal top mounts. The low-pressure, twin tube damper strikes the perfect balance between comfort and performance.

NISMO LM-RS1 Wheels, Anthracite

NISMO LM-RS1 Wheels, Black

NISMO LM-RS1 Wheels, Bronze

Front Outer Tie Rod Ends (R35/Z34/RZ34)

The NISMO Front Outer Tie Rod Ends (TRE) allow for bumpsteer adjustment by enabling the tie rod end pivot to be relocated with the use of spacers.

Front Upper Control Arms (Z34/RZ34)

The NISMO Z Front Upper Control Arms are designed with dual chassis mount adjusters, providing camber and caster adjustment while attached to the vehicle.

Nissan Z Adjustable Sway Bar Kit

The NISMO RZ34 Adjustable Sway Bar Kit is designed to reduce body roll and improve steering response, while not adversely affecting the ride quality. Kit includes front and rear bars.

Nissan Z Front Strut Tower Brace

Featuring a design optimized to reduce weight while ensuring proper chassis stiffness, this is a simple bolt-on improvement to the engine bay of any new Z.

NISMO Rear Traction Arms (Z34/V36/RZ34)

The NISMO Rear Traction Arms / Rods (RTR) eliminate the rubber bushings on the stock links to reduce geometry changes in the rear suspension under hard acceleration/braking and when going over bumps.

NISMO Rear Lower/Camber Link Set (Z34/V36/RZ34)

The NISMO Rear Camber Links (RLL) allow for an increased range of rear camber adjustment, which is necessary for lowered cars and for performance alignments. The NISMO Rear Camber Links provide increased stability and predictability to the rear suspension for tighter handling.

NISMO Rear Toe Arm Set (Z34/V36/RZ34)

The NISMO Rear Toe Arms (RTA) allow for an increased range of rear toe adjustment, necessary for lowered street cars and performance alignments for track use.

NISMO Rear Midlink Set (Z34/V36/RZ34)

The NISMO Rear Mid Links (RML) replaces the stock spring bucket links to offer complete control over rear toe, rear spring rate and ride height.

Front End link Set (Z34/V36/RZ34)

The NISMO Front End links (FE) feature massive 1/2" Rod Ends to provide the highest load capacity for use with NISMO or OEM sway bars.

End link Set (Z33/V35,Z32,Z34/V36/RZ34)

The NISMO Rear End links (RE) feature massive 1/2" Teflon lined Rod Ends to provide the highest load capacity for use with NISMO or OEM sway bars.

Nissan Z Coolant Expansion Tank

The NISMO RZ34 Coolant Expansion Tank is a great way to increase the thermal capacity of the charge air system and improve the appearance of the engine bay with NISMO branding, front and center.

Nissan Z Twin Disc Clutch and Flywheel Kits

Nissan Motorsports is proud to announce two new NISMO RZ34 Twin Disc Clutch & Flywheel kits! A NISMO Street twin disc clutch kit that is designed to handle up to 800hp and 750lb/ft of torque while delivering an easy, OE pedal-feel. And the NISMO Track twin disc clutch kit is capable of holding 1,000hp and 1,200lb/ft of torque!

Cat-Back Exhaust Systems

NISMO cat-back exhausts for the Nissan Z feature T-304 Stainless Steel construction and direct bolt-on application using OEM mounting hanger locations- no modifications required. Design includes 2.25"diameter piping, laser-etched NISMO logos, and increased exhaust gas flow with a measurable reduction in back pressure. Available in both Track and Street versions.

NISSAN Z Big Brake Kit

The NISMO Big Brake Kit for the Nissan Z is a complete track-tested brake package that includes everything needed to upgrade the braking performance on the new Nissan Z.

NISMO Multi Function Blue Mirror

Featuring a multi-layer coating for a high performance blue finish that delivers robust anti-glare vision for night driving as well as a hydrophilic surface that guarantees constant surface visibility across the whole of the mirrors surface when driving in the rain.

NISMO Carbon Door Mirror Cover

The NISMO Carbon Door Mirror Covers use aerodynamics tested and advanced at race tracks around the world. Air resistance has been minimized.

NISMO Oil Filler Cap

The NISMO Oil Filler Cap is a machine aluminum cap that adheres overtop of the OE ratchet cap.

NISMO Fuel Filler Cap Cover

The NISMO Fuel Filler Cap is a die-cast aluminum cover for your fuel tank cap.

Nissan Z Kick Plate Set

An easy way to add a NISMO touch to the Nissan Z, these kick plates are made from a resin base overlaid with a dry carbon top plate and feature a prominent NISMO logo.

NISMO Open Lug Set - Black

NISMO open ended lug nut set are a great addition to some aftermarket wheels. The open end design allows for full thread engagement when using longer wheel studs. Featuring forged 50BV30 chromium-vanadium steel construction, this 20 piece kit includes a 19mm hex socket adapter and is a perfect match for any 5 lug application.